1.818.206.5781 info@dnmagsupply.com

YARDNEY | Centrifugal Sand Separators

Centrifugal Sand Separators Technical
Yardney Centrifugal Sand Separators are ideal for removal of suspended solids and inorganic materials with a specific gravity of 2 or greater. This highly effective system will provide consistent, simple removal of inorganic material down to 75 microns. Easily installed, these carbon steel units are rated to 150 psi with threaded or flanged inlet/outlet connections. Smaller models are designed for vertical installation while larger models are angled and floor or ground mounted.Sizing must be within the specified flow range for proper centrifugal action. Larger flow separators and custom designed systems are available.
Centrifugal Sand Separators Technical
APPLICATIONS

  • Removal of sand, rock, grit and other inorganic contaminants to protect drip and micro-irrigation systems with fine removal down to 200 mesh or 75 microns
  • 150 psi standard operating pressure (high pressure systems available)
  • Flow ranges from 4 gpm and up
  • Removal of solids with a specific gravity of 2 or greater
  • Serves as an excellent pre-filter to allow for improved sand media, or screen filter performance by removing the gross solids from the water source

 
ADVANTAGES

  • Sand removal efficiency of 98% of solids down to 200 mesh, or 75 microns
  • Multiple units in series provide higher efficiencies of filtration
  • Units are available in ASME code or non-code construction
  • Available with a manual or automatic solids purge valve system
  • Special alloys and coatings are available for prolonged life in required applications
  • Made in USA
Centrifugal Sand Separators Technical